Fasilitas Inspeksi

  • Fatique Test

    To measure the fatique strength of leaf spring

  • Load Test

    To measure the load characteristic such as load, height and spring rate of springs

  • Tensile Test

    For testing of strength in tensile, compressive, strain, elongation for raw material, semi finished and finished products

  • Fatique Clutch

    To measure the fatigue strength for coil spring, valve springs, torsion springs and compression springs

  • Rockwell Hardness

    For testing the hardness of material such as center bolt, nut, flat bar, punch tool, etc with the result of HRC, HRB and Rockwell Superficial

  • Automatic Spring Testing

    To measure the load characteristic such as load, height, spring rate, etc of compression springs

  • Torque Spring Tester

    To measure the load characteristic such as load, height, spring rate, etc of torsion springs

  • Metallurgical Microscope

    To inspect the micro structure, decarburization and grain size for raw material, semi finished and finished products

  • Salt Test

    For testing the corrosion resistance of all kinds of metals whether plated or organic coated or inorganic coated by exposing to atomized salt solution. Check if the specimen has the conditions of denting, rusting, cracking or blister after test

  • X-Ray Machine

    To measure the residual stress of springs both coil and leaf spring

  • X-Ray Output

  • Coulometer

    To measure the water content value of quenching oil